How to Clean iPhone Charging Port Without Damage

If you buy an iPhone or iPad today, it will be brand new; You won’t have any problems at first, except in the case of manufacturing defects. However, if you continue to work with the iPhone/iPad, you’ll probably run into problems when charging. Sometimes you will find that the device does not charge or stops charging after the initial five minutes and something needs to be done with the charging port. In this article, we’ll give you several tips for how to clean iPhone charging port without any damage to let the device run as usual.

how to clean iphone charging port

According to Apple, an iPhone or iPad tablet should recharge when you plug it into a power socket using a charging cable. The only condition is that the cable is the original Apple accessory.

If you can’t charge the device even after using the original charging cable, you should quickly check for other factors, including whether the charging port needs to be cleaned.

The problem with charging ports is that they are located at the bottom of your iPhone and are always open. You can’t close ports even if you’re not working with the device.

The only way to prevent dust from reaching the load port is to cover it with a good quality case. Yet most people can simply ignore the port in everyday life until they discover that their device is not charging and decide to clean it.

You should note that dirt, stuffed animals, including debris, can accumulate inside charging ports over time. Dust builds up inside the charging port even if you keep the device in a case. And inside the ports, you’ll find tiny pins, which ultimately recharge the device by establishing connectivity with the charging cable.

Sometimes it’s the accumulated dust that prevents the port pins from connecting to the charging cable, so you can solve the load problem by cleaning the load port as shown below.

How to Clean iPhone Charging Port

Tip 1 – Using compressed air

The best way to remove dust and dirt is to carefully spray a huge blow of air on the charging ports. You should take precautions as the air can push dust into the port making the device unusable. Apple has warned customers against using compressed air when cleaning the Lightning port. However, if you follow the steps described here, you will be able to clean the dust without any problems.

  • You have to get air can with a small straw that can be attached to the nozzle.
  • Stop your iPhone or iPad.
  • Place the connected straw at one end of the iPhone’s Lightning port.
  • Blow short, slow explosions in the charging port of your iPhone or iPad. And make sure you don’t explode for more than 2 seconds.
  • Repeat this process several times until you see that the dust is completely removed.

It is also advisable to use a mini vacuum cleaner if you want to remove debris and other particles.
Then you need to connect the iPhone to your power source to check the result. If the device starts charging for more than 30 minutes, you don’t need to do any further work.

Tip 2 – Use a toothpick

You can use the Toothpick method if the compressed air doesn’t work to your expectations. The main advantage of Toothpick is that it won’t damage loading ports and pins if you use it gently and carefully.

You can use pins, needles, and paper clips, but the port will be irreparably damaged. We strongly recommend using the toothpick with round tips as they are not sharp and therefore will not damage your iPhone.

  • Turn off your iPhone or iPad.
  • Hold your iOS device with one hand and a toothpick with the other.
  • Insert the toothpick into Lightning Harbour.
  • Move the toothpick slowly and gently against the back wall and occasionally blow air into the hole to remove dirt.

After repeating the above actions, you should also use a good quality flashlight to check for dust, particles, and debris left inside the harbor.

Tip 3 – Using a mobile case with a port lid

If you buy an iPhone or iPad, you need to buy a good quality case with a port lid to avoid surface damage and dirt. You can buy a flap case with a transparent front for the iPhone or opt for a fully covered shell for the iPad.

The lid should include a zip, which you can apply when the device is not in use. Dust and other particles will never enter the lid but will accumulate on top, making it easier to clean. It would be best if you used the case every day to prevent your iOS device from dust.

In addition, you can also choose a storage drawer to store all your gadgets, instead of exposing them to air without using them to accumulate dust.

Conclusion

Even though it’s easy to clean the iPhone’s charging port, you need to make sure you don’t damage the pins. If the load port is damaged, you will need to have it replaced, which would be a difficult task, otherwise, you will not be able to work with the device.

If you don’t know the right way to clean the load port, you should find a professional or go to a professional mobile repair shop. Technicians will inspect your iOS device and do the required work properly.

You will have to pay a small service charge to clean the iPhone’s charging port perfectly, but your device will be safe.

And before you clean up the port or fix it, you must first back up your data on iTunes or iCloud in case of data loss.

Add Comment